P200-02-720 Issue K 
Declaration of Conformity 
 
We, Edwards Limited, 
  Crawley Business Quarter 
 Manor Royal, 
 Crawley, 
  West Sussex  RH10 9LW, UK 
 
declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the 
technical file, that the product(s) 
 
  Low Volt Systems  High Volt Systems 
  (200-230V)  (380-460V) 
 iXH3030  AC530xy22300  ACF30xy22300  
  iXH3030T  AC531xy22300  ACF31xy22300 
  iXH3030TX  AC532xy22300  ACF32xy22300 
  iXH3045H  AC5D0xy23310  ACFD0xy23310 
  iXH4545HT  AC6D1xy23300  ACGD1xy23300 
  iXH4545HT    -  ACGD1B123390 
  iXH6045H  AC7D0xy23300  ACHD0xy23300 
  iXH6045H  AC7D02123310  ACHD02123310 
  iXH6045HT  AC7D1xy23300  ACHD1xy23300 
  iXH450H  AC0D0xy23000  ACAD0xy23000 
  pXH4500  AC6000120300  ACG000120300 
  pXH4500    -  ACG000120310 
  pXH6000  AC7000120300  ACH000120300 
  iXL500Q   AS450zy23300  ASE50zy23300 
  iXL500R  AS550zy23300  ASF50zy23300 
   
Where x = 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C or D depending on gas module type 
  Where y = 1 means 'no check valve' and y=3 means 'check valve supplied' 
  Where z = 1, 2, 3, 5, A or B depending on gas module type for iXL 
 
to which this declaration relates is in conformity with the following standard(s) 
or other normative document(s) 
 
EN1012-2: 1997  Compressor and Vacuum Pumps Safety Requirements. Part 2 - Vacuum Pumps 
EN61010-1: 2010  Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory 
Use. Part 1 – General Requirements. 
  EN 61326-1: 2006   Electrical equipment for measurement, control and laboratory use - EMC  requirements  
    (Industrial Location Immunity – Class A Emissions) 
EN50581:2012  Technical Documentation for the Assessment of Electrical and Electronic Products 
with respect to the Restriction of Hazardous Substances 
 
ANSI/UL 61010-1 and CAN/CSA-C22.2 No. 61010-1, 2
nd
 Edition July 12, 2004, including revision July 22, 2005 - 
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, Part 1: General 
Requirements 
 
SEMI S2-0709 - Environmental, Health, and Safety Guideline for Semiconductor Manufacturing Equipment 
   
when installed in accordance with the instruction manual supplied with the pump,  
following the provisions of: 
 
2006/95/EC Low Voltage Directive 
2004/108/EC Electromagnetic Compatibility Directive 
2006/42/EC  Machinery Safety Directive 
2011/65/EU*  Restriction of Certain Hazardous Substances (RoHS) Directive 
 
* i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt% for 
cadmium -  in homogeneous materials (subject to the exemptions allowed by the Directive). The RoHS Directive does 
not legally apply to industrial vacuum equipment until July 2019 (July 2017 for instruments).
 
 
Note:  This declaration covers all product serial numbers from the date this Declaration was signed onwards. 
 
 
                         22.10.2013, Burgess Hill 
 
  Mr Mark Hope, Global Technical Support Manager       Date and Place 
 
This product has been manufactured under a quality system