Need help?Do you have a question about the Edwards iXH4545HT and is the answer not in the manual?
General| Brand | Edwards |
|---|---|
| Model | iXH4545HT |
| Category | Water Pump |
| Language | English |
Details typical pumping speed, ultimate vacuum, and maximum continuous inlet pressure for each pump.
Lists motor ratings, current ratings, fuse requirements, and cable specifications for pump models.
Guides on positioning the pump, ensuring levelness, and securing it against movement.
Provides instructions for connecting the pump's inlet and exhaust to vacuum and extraction systems.
Details requirements for connecting the system to a safe and protected electrical supply.
Provides detailed steps for connecting the electrical supply cable using Harting connectors.
Explains how to connect the system to an external emergency stop circuit or use its built-in button.
Provides instructions for connecting and setting up the cooling water supply and flow rate.
Guides on the final checks and steps required to commission the pumping system.
Details the procedures for safely starting up the pumping system, including MicroTIM, PDT, and front panel controls.
Provides instructions for manually shutting down the pumping system, including different modes and control methods.
Details automatic shut-down procedures triggered by alarm conditions.
Lists pump protection sensors and the conditions that trigger warnings and alarms.
Explains how to use the emergency stop function for immediate system shutdown.
Guides on how to safely restart the system after an emergency stop or alarm shutdown.
To Next Page