Edwards SIGA-IM User Manual

P/N P-047550-1788-EN • REV 013 • ISS 08SEP19 3 / 3
Specifications
Operating voltage 15.20 to 19.95 VDC
Current
Standby
Alarm
170 µA
170 µA
Circuit resistance between
isolators
6 Ω max.
Ground fault impedance 10 kΩ
Circuit designation
Signaling line circuit Class A, Class X
Wire size 12 to 18 AWG (1.0 to 4.0 mm²)
Compatible electrical boxes
2-1/2 in. (64 mm) deep double-gang
box; 4 in. square box, 1-1/2 in. (38
mm)
deep with double-gang cover
Operating environment
Temperature
Relative humidity
32 to 120°F (0 to 49°C)
0 to 93% noncondensing
Storage temperature range −4 to 140°F (−20 to 60°C)
Regulatory information
FCC compliance
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Contact information
For contact information, see www.edwardsfiresafety.com.

Edwards SIGA-IM Specifications

General

Brand	Edwards
Model	SIGA-IM
Category	Security Sensors
Language	English