Edwards Signature Series User Manual

2 / 2 P/N 3102362-EN • REV 01 • ISS 06APR16
2. Activate the smoke sensor using No Climb Products model Smoke
Centurion/M8, FireTech Smoke or Smoke Sabre smoke aerosol
spray, a smoke generator, or the Testifire detector tester per the
manufacturer’s instructions.
Maintenance
To ensure proper operation, plan maintenance (regular or selected) of
the detector in accordance with the AHJ and all applicable governing
laws, codes, or standards. Refer to CAN/ULC-S536 Standard for the
Inspection and Testing of Fire Alarm Systems and NFPA 72 National
Fire Alarm and Signaling Code.
Refer to application bulletin P/N 3102403-EN for additional information
and cleaning instructions.
Specifications
Operating voltage 15.20 to 19.95 VDC
Current
Normal operating
Alarm
32 µA
32 µA
Vibration level 10 to 35 Hz, with an amplitude of
0.01 in.
A
ir velocit
y
[1] 0 to 4,000 ft./min (0 to 20.32 m/s)
Wall mounting: distance from
ceiling
12 in. (305 mm) max.
Compatible bases
Standard
Relay
Isolator
Audible
SIGA-SB, SIGA-SB4
SIGA-RB, SIGA-RB4
SIGA-IB, SIGA-IB4
SIGA-AB4G, SIGA-AB4GT
SIGA-AB4G-LF
Compatible detector testers Testifire 1000, Testifire 2000
Operating environment
Temperature
Relative humidity
32 to 120°F (0 to 49°C)
0 to 93% noncondensing
Storage temperature −4 to 140°F (−20 to 60°C)
Environmental compensation Automatic
[1] For duct installation, use a SIGA-DMP duct detector mounting plate
and install per P/N 387053P-EN.
Regulatory Information
North American
standards
CAN/ULC-S529, UL 268, UL 268A
UL/ULC smoke
sensitivity range
0.53 to 3.94 %/ft. (1.7 to 12.35 %/m) obscuration
FCC compliance This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Industry Canada
compliance
This Class A digital apparatus complies with
Canadian ICES-003.
Contact information
For contact information, see www.edwardsfiresafety.com
© 2016 Walter Kidde Portable Equipment, Inc.
All rights reserved.

Edwards Signature Series Specifications

General

Alarm Sound Level	85 dB at 10 feet
Power Source	120V AC, 9V DC battery backup
Operating Humidity	10% relative humidity
Hush Feature	Yes
Compliance	UL 217
Operating Temperature	40°F to 100°F (4°C to 38°C)