80
MV-2509-03-2024
.
eeese-aircare.com © All rights reserved eeese air care ApS
UK
Auto Shut o with Water Tank Full Indicator
The unit will enter into standby mode when the water tank is full or when the water tank
is not installed properly. After emptying the tank, or installing the water tank properly, the
unit will go on to the previous mode.
Except for the power button, all other buttons are invalid.
Memory Function:
a. When unplugged directly or power is cut, then reconnect to the power supply, the
dehumidier will run with the mode prior to the shutdown. The timer setting will
be kept.
b. Press the power button to switch o the dehumidier, and then press the power
button to switch it back on. The dehumidier will run with the mode prior to the
shutdown. The timer setting will be cancelled.
c. Switch o the dehumidier and unplug the power cord, then reconnect the power
supply and switch on the dehumidier. It will run in factory preset mode.
To Next Page
Loading...
