68
MV-2521-01-2020
.
eeese-aircare.com © All rights reserved by Eeese Air Care APS
UK
Air blower function [air blower button]
Press B until the light is o next to “FAN” to switch to the air fan mode and select be-
tween low fan speed and high fan speed by pressing A.
Dehumidier function [dehumidier button]
Press A until you see that the light is o next to “DEHUM” to start
augterfunktionen.
Sleep mode function
By choosing sleep mode the unit switches to low fan speed.
The dehumidier stops if the room is too cold, but restarts when the temperature
goes above 17 °C.
Remote control
When the unit is switched on with the remote control (A), the cooling function is switched
on automatically. The blowing speed can be changed between low and high blow speed
by pressing B. Press F to toggle between the cooling, blow and dehumidier function. The
timer is activated by pressing E, and the arrow buttons (C and D) set the number of hours
for the device to be automatically switched o. The timer is reset and stopped by press-
ing E twice. By choosing sleep mode (G) the unit switches to low fan speed.
A B
A
G
A B C D E F
To Next Page
Loading...