MV-2525-11-2021
.
eeese-aircare.com © All rights reserved by weese air care a/s
75
UK
Screw the composite pipe C to the back of the unit
back, as illustrated to the right - E.
The left end of the composite tube (D), is set into
place with the provided rail (F).
Gently push the rail to the left until the holes in the rail and tube overlap (K). So that the
supplied screw can be inserted (L).
At the opposite end of the rail (J), there is a hole for the supplied screw bracket (M) as
shown in the picture N. Lift the screw bracket enough to allow the groove of the other rail
E
F
LJ K
NM O
To Next Page
Loading...
