76
MV-2525-11-2021
.
eeese-aircare.com © All rights reserved by weese air care a/s
UK
(to the right of image O) to pass through.
Adjust the rails to t the window and tighten the rails
with the supplied bracket and nut.
Depending on the window, the rail can
be positioned horizontally or vertically
as illustrated on the right side.
The pipe must be between 280-1500mm and must not be replaced or extended
with another tube. As this may cause the device to fail to function properly.
4. Instruction manual
Switching the unit on/o
Connect the power supply and press the on/o button (A) once to turn on the device.
By default, the device runs on cooling with low fan speed. The on/o indicator will be
switched on.
P
A
To Next Page
Loading...
