Efco 8250 IC ERGO - Page 14

14
Italiano FrançaisEnglish
2. 4-tooth nylon blade – Ø 9”/230 mm
3. “Pro Trim Universal” disc 3-blade – Ø
9”/230 mm
4. “Pro Trim Professional” disc 3-blade – Ø
10”/255 mm
6. “Tap and go” head Ø 5.1” – 2 nylon lines
Ø 0.094”
7. “Multiline” head Ø 2.75”/73 mm – 6
square, lines 0.13” sides
8. 3-tooth disk Ø 10”/255, 0.07” thickness
9. 3-tooth disk Ø 9”/230 mm, 0.05”
thickness
10. 8-tooth disk Ø 9”/230 mm, 0.05”
thickness
WARNING! – The use of cutting
devices
not au thorised by the manufacturer can
generate safety risks.
2. Lama di nylon 4 denti – Ø 9”/230 mm
3. Disco “Pro Trim Universal” 3 lame – Ø
9”/230 mm
4. Disco “Pro Trim Professional” 3 lame – Ø
10”/255 mm
6. Testina “Batti e vai” Ø 130 mm – 2 fi li
nylon Ø 2.4 mm
7. Testina “Multiline” Ø 2.75”/73 mm – 6 fi li
quadrati lato 3 mm
8. Disco 3 denti Ø 10”/255 1.4 mm, spes-
sore 1.8 mm
9. Disco 3 denti Ø 9”/230 mm, spessore
1.4 mm
10. Disco 8 denti Ø 9”/230 mm, spessore
1.4 mm
ATTENZIONE! - L’utilizzo di dispositivi
di taglio non approvati dal costruttore può
condurre a situazioni di pericolo.
2. Lame nylon 4 dents – Ø 9”/230 mm
3. Disque “Pro Trim Universal” 3 lames – Ø
9” 230 mm
4. Disque “Pro Trim Professional” 3 lames
– Ø 10”/255 mm
6. Tête “Tap and go” Ø 130 mm – 2 fi ls nylon
Ø 2.4 mm
7. Tête “Multiline” Ø 2.75”/73 mm – 6 fi ls
carrés côté 3 mm
8. Disque 3 dents Ø 10”/255 mm, épaisseur
1.8 mm
9. Disque 3 dents Ø 9”/230 mm, épaisseur
1.4 mm
10. Disque 8 dents Ø 9”/230 mm, épaisseur
1.4 mm
ATTENTION! - L’utilisation d’accessoires
de coupe non approuvé par le constructeur
peut entraîner des situations à risque.
DISPOSITIVI DI TAGLIO CONSIGLIATI RECOMMENDED CUTTING DEVICES DISPOSITIFS DE COUPE PRÉCONISÉS