Need help?Do you have a question about the Efco 8250 IC ERGO and is the answer not in the manual?
General| Brand | Efco |
|---|---|
| Model | 8250 IC ERGO |
| Category | Brush Cutter |
| Language | English |
Specifies protective clothing and gloves for using metal or plastic blades.
Instructs to keep people at least 15 meters away from the work area.
Emphasizes reading the manual before operating the machine.
Mandates wearing a helmet, goggles, and hearing protection.
Prohibits the use of the brushcutter with a wood cutting disk.
Advises against using the brush cutter when tired, or under the influence.
Details required safety clothing like boots, trousers, gloves, eyewear, and helmet.
Prohibits children from operating the brush cutter.
Ensures no other people are within 50 ft during operation.
Mandates operating the brush cutter with the blade guard or head attached.
Details safe fuel filling procedures, away from heat sources and with engine off.
Advises stopping to check the blade for cracks or breaks during work.
Advises against performing unauthorized repairs and to consult an authorized dealer.
Stresses the importance of using approved protective clothing for operation.
Advises wearing snug but comfortable clothing that does not hinder movement.
Recommends safety shoes with anti-skid soles and steel toe caps.
Advises wearing protective goggles or face shields for eye safety.
Recommends using ear protection to reduce noise exposure.
Suggests wearing gloves that provide maximum vibration absorption.
Instructions for attaching the safety guard to the shaft arm.
Steps for mounting the cutting disk onto the brush cutter.
Guide for installing the nylon line head onto the brush cutter.
Instructions for mounting and adjusting the handle assembly.
General safety rules and prohibitions for operating the brush cutter.
Details on preparing and using the correct fuel/oil mixture for the engine.
Step-by-step guide for starting the brush cutter engine.
Instructions for the initial engine run-in period to ensure longevity.
Procedure for safely shutting down the brush cutter engine.
Information and warnings regarding carburetor adjustment and maintenance.
Guide on adjusting and wearing the harness for proper balance and height.
Basic rules for operating the brush cutter safely and correctly.
General safety instructions for performing maintenance tasks, emphasizing gloves.
Procedures for cleaning and checking the air filter for optimal engine performance.
Guidance on checking and cleaning the fuel filter for smooth operation.
Instructions for cleaning engine cooling fins to prevent overheating.
Steps for cleaning and checking the spark plug for proper ignition.
Guidance on checking the grease level in the gear housing.
Instructions for sharpening the 8-tooth cutting disk correctly.
Details on sharpening the 3-4 tooth grass cutting blades.
Procedures for storing and transporting the brush cutter, including protective measures.
Step-by-step guide for replacing the nylon line in the head.
To Next Page