Efco 8270 TR - Page 14

14
Italiano FrançaisEnglish
p.n. 4161530
4.
p.n. 4161567
3.
p.n. 4095596
2.
1.
DISPOSITIVI DI TAGLIO CONSIGLIATI DISPOSITIFS DE COUPE PRÉCONISÉSRECOMMENDED CUTTING DEVICES
8270 TR
5A. Testina “Batti e vai” Ø 105 mm – 2 fi li nylon Ø 2
mm.
8270 S - 8270 T
1. Lama di nylon 8 denti – Ø 9”/230 mm
2. Lama di nylon 4 denti – Ø 9”/230 mm
3. Disco “Pro Trim Universal” 3 lame – Ø 9”/230 mm
4. Disco “Pro Trim Professional” 3 lame – Ø 10” /255
mm
5. Testina “Batti e vai” Ø 105 mm – 2 fi li nylon Ø 2
mm
6. Testina “Batti e vai” Ø 130 mm – 2 fi li nylon Ø 2.4
mm
7. Testina “Multiline” Ø 2.75”/73 mm – 6 fi li quadrati
lato 3 mm
7A. Disco 3 denti Ø 10”/255 1.4 mm, spessore 1.8
mm
8. Disco 3 denti Ø 9”/230 mm, spessore 1.4 mm
9. Disco 4 denti Ø 9”/230 mm, spessore 1.4 mm
ATTENZIONE - L’utilizzo di dispositivi di
taglio non approvati dal costruttore può con-
durre a situazioni di pericolo.
8270 TR
5A. Tête “Tap and go” Ø 105 mm – 2 fi ls nylon Ø 2 mm
8270 S - 8270 T
1. Lame nylon 8 dents – Ø 9”/230 mm
2. Lame nylon 4 dents – Ø 9”/230 mm
3. Disque “Pro Trim Universal” 3 lames – Ø 9”/230 mm
4. Disque “Pro Trim Professional” 3 lames – Ø 10”/255
mm
5. Tête “Tap and go” Ø 105 mm – 2 fi ls nylon Ø 2 mm
6. Tête “Tap and go” Ø 130 mm – 2 fi ls nylon Ø 2.4
mm
7. Tête “Multiline” Ø 2.75”/73 mm – 6 fi ls carrés côté 3
mm
7A. Disque 3 dents Ø 10”/255 mm, épaisseur 1.8 mm
8. Disque 3 dents Ø 9”/230 mm, épaisseur 1.4 mm
9. Disque 4 dents Ø 9”/230 mm, épaisseur 1.4 mm
ATTENTION - L’utilisation d’accessoires de
coupe non approuvé par le constructeur peut
entraîner des situations à risque.
8270 TR
5A. “Tap and go” head Ø 105 mm – 2 nylon lines Ø 2
mm
8270 S - 8270 T
1. 8-tooth nylon blade – Ø 9”/230 mm
2. 4-tooth nylon blade – Ø 9”/230 mm
3. “Pro Trim Universal” disc 3-blade – Ø 9”/230
mm
4. “Pro Trim Professional” disc 3-blade – Ø 10”/255
mm
5. “Tap and go” head Ø 105 mm – 2 nylon lines Ø 2
mm
6. “Tap and go” head Ø 130 mm – 2 nylon lines Ø 2.4
mm
7. “Multiline” head Ø 2.75”/73 mm – 6 square
lines 3 mm sides
7A. 3-tooth disk Ø 10”/255, 1.8 mm thickness
8. 3-tooth disk Ø 9”/230 mm, 1.4 mm thickness
9. 4-tooth disk Ø 9”/230 mm, 1.4 mm thickness
WARNING – The use of cutting devices not
authorised by the manufacturer can generate
safety risks.