Warum läuft mein Efco-Freischneider nicht im Leerlauf?
Wenn Ihr Efco-Freischneider startet, läuft und beschleunigt, aber nicht im Leerlauf läuft, drehen Sie die Leerlaufdrehzahlschraube "T" im Uhrzeigersinn, um die Leerlaufdrehzahl zu erhöhen.
Perché il mio decespugliatore Efco non tiene il minimo?
Se il tuo decespugliatore Efco si avvia, gira e accelera, ma non tiene il minimo, regola la vite del minimo “T” in senso orario per aumentare la velocità.
General| Brand | Efco |
|---|---|
| Model | STARK 4400 BP |
| Category | Brush Cutter |
| Language | English |
General overview and purpose of the manual.
Crucial safety warning regarding noise exposure and hearing protection.
Key safety guidelines for using the brush cutter and general work area safety.
Essential safety rules for operating the machine and working safely.
Instructions for correctly installing the safety guard.
Steps for mounting the cutting blade correctly.
Steps for mounting the cutting disc correctly.
Steps for mounting the nylon line head.
Guidance on properly adjusting and wearing the harness for balance.
Crucial instructions for safe handling and mixing of fuel.
Step-by-step guide for refueling the machine.
Step-by-step guide to starting the engine.
Procedures and precautions for the engine's initial operating period.
Lists unsafe or forbidden ways to use the machine.
Lists unsafe or forbidden ways to use the machine.
Safety guidelines for the immediate work environment.
General advice on how to perform cutting tasks effectively.
Essential safety rules for operating the machine and working safely.
Essential checks before operating the machine.
Techniques for trimming grass with a nylon line head.
Techniques for clearing debris using the rotating cord.
Specific instructions for using the circular saw blade for clearing.
Information and precautions related to the circular saw blade tool.
Techniques for cutting brush with a saw blade.
Instructions on how to properly sharpen cutting blades.
Guidelines for maintaining the sharpness of the cutting disc.
Procedures for correctly sharpening the saw blade.
Maintenance procedures for the nylon line head component.
Maintenance and safety warnings for the muffler.
Instructions for cleaning and maintaining the air filter.
Steps for cleaning and checking the spark plug.
Recommendations for periodic general inspections by a technician.
Steps for draining fuel, cleaning, and storing the machine safely.
Specifications for sound pressure, sound power, and vibration levels.
Information on where to find technical documentation.
A table outlining maintenance tasks and intervals.
A guide to diagnosing and resolving common operational issues.
Terms and conditions of the product warranty.
To Next Page
