en
11
ASSEMBLY
Lubricant for reduction gearbox (Fig.13)
WARNING! - The earth auger is supplied with TAMOIL
TAMLITH GREASE 2 (150 g) grease in the reduction
gearbox.
Remove the screw (A) under the reduction gearbox and check for the
presence of grease.
Fitting bits (Fig.14-15)
Fit the reduction shaft (B) into the seat on the bit (D) and secure it
using the appropriate gudgeon pin (C).
WARNING! - Do not change the ratio of the reduction
gearbox. The characteristics of the machine could
change and unforeseen reactions could occur.
Optional earth augers accessories
Augers (Fig.16)
Equipped with tip and flute made of special steel to ensure top
performance and excellent resistance to wear.
Description Part number
Single flute auger ø 3" x 39.3" 375100028A
Single flute auger ø 4" x 39.3" 375100029A
Single flute auger ø 6" x 39.3" 375100030A
Single flute auger ø 8" x 39.3" 375100031A
Extensions (Fig.16)
To obtain greater drilling depth.
Description Part number
12" extension 375100101
Ice augers (Fig.17)
For drilling through ice.
Description Part number
Ice augers 375100110
13
15
16
17
14
To Next Page
Loading...
