Need help?Do you have a question about the Efergy Elite Classic and is the answer not in the manual?
Instructions on locating the main electrical panel and identifying the live feed wires for sensor attachment.
Steps for placing sensors around feed wires, inserting sensor jack, and mounting the transmitter with batteries.
Procedure for inserting batteries into the monitor and linking the transmitter using the LINK button.
Detailed steps for setting the time and date on the monitor using the TIME SET, MODE/SET, BACKWARD, and FORWARD buttons.
Instructions on how to adjust the voltage setting using the monitor's buttons.
Guide to selecting the desired currency from available options using the MODE/SET and navigation buttons.
How to select and configure up to four different tariff cost periods.
Steps to set the cost per kWh for each tariff period, adjusting values with navigation buttons.
Setting the carbon emissions ratio value in KgCO2 per kWh.
Configuring the maximum power consumption target to trigger an audio alert.
Selecting the preferred temperature scale (Celsius or Fahrenheit) for display.
Instructions for setting up start and end times for dual or multiple tariff periods.
To Next Page
General