EasyManua.ls Logo

Effekta ES2200 - Positioning

Effekta ES2200
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Photovoltaic Solar Inverter Series ES
Introduction
ES series
13
1.8 Positioning
Do not install in an area in which combustible vapours result e.g. from
petrol tanks, engine compartments, etc.
The photo voltaic solar inverter is designed for operation in ventilated rooms
with an ambient temperature of 0° to 40°C.
If the photovoltaic solar inverter is exposed to severe and quick temperature
changes, there is danger of condensation. Before you take additional steps, an
acclimatisation period of at least 2 hours is to be observed.
Never place or operate the device in a moist environment. Keep liquids away
from the device.
The photovoltaic solar inverter may not be placed in the vicinity of heat
sources.
It is to be placed in a horizontal position.
Ensure that the external side and the front side of the device are at least 20 cm
from other objects for ventilation in order to prevent trapped air and too much
warming. Make sure that the air openings cannot be covered, e.g. through
sucked-in paper, material, etc.

Related product manuals