The measuring head must never be modified or operated outside the instrument.
Do not use the instrument in environments where explosion hazard exists.
Do not use the instrument in environments with temperatures higher than 40°C or lower than 10°C.
Do not store the instrument in environments with temperatures higher than 70°C or lower than -20°C.
Protect the instrument from chemical agents, corrosive vapors, strong vibration and mechanical impact.
Use only the power supply supplied by the manufacturer. Use only accessories and spare parts supplied by the
manufacturer.
The instrument must always be shipped in such a way to avoid damage during transport, with the transport guard in
the active position and in the original packaging.
Service and warranty
The ES-6000 is warranted for one year from the date of shipment from EFI. For warranty service, please contact your
dealer or printer manufacturer.
For service after the 1-year warranty period or for re-certification of the instrument to ISO standards, contact X-Rite
directly.
Only a trained service engineer at a certified service center should perform service. The measuring lamp in the
instrument should only be replaced at a certified service center.
Technical specifications
The technical specifications can be obtained from X-Rite.
Setup Guide
EFI ES-6000 Spectrophotometer
6
To Next Page
Loading...
Need help?
General
