TURN EARBUDS OFF AND ON:
POWER ON:
Open the Charging Pod and take out the earbuds. You
will hear a soft chime and if successfully connected to a
Bluetooth device the LED indicator atop each earbud will
pulse softly.
POWER OFF:
Simply place the earbuds back into their respective slots and
the earbuds will power o automatically. The LED indicator
will first flash rapidly and then begin to softly pulse to
indicate charging.
PLEASE NOTE:
When the charging pod is out of battery, the earbuds will
not turn on/o automatically when removed from or placed
back into the charging pod. In this case, please recharge the
charging pod.
To Next Page
Loading...
