EFNOTE 7 - Adjusting the Hi-Hat (Auto Calibration)

17
Basic Operation
Adjusting the hi-hat manually
• When the hi-hat sound is not closed enough despite you
press the pedal rmly, increase the “Closed HH Tightness”
value.
• When the hi-hat sound is not open easily even if you slightly
release the pedal,
decrease the value.
• The default setting
is “0”.
Changing the Power Save Setting
1 >
Adjusting the Hi-Hat (Auto Calibration)
1 >
When “O”, the module will not turn o
automatically.
2
2
3
3
Drop the top hi-hat cymbal.
4