Need help?Do you have a question about the EG4 6500EX-48 and is the answer not in the manual?
General| Model | EG4 6500EX-48 |
|---|---|
| Rated Power | 6500W |
| Max PV Array Power | 8000W |
| Battery Voltage | 48V |
| Max Charging Current | 120A |
| Waveform | Pure Sine Wave |
| Efficiency | 93% |
| Communication | RS485, CAN |
| Operating Temperature | -10°C to 50°C |
| Cooling | Fan |
| Frequency | 50Hz/60Hz |
| MPPT Range | 120-450VDC |
| Battery Voltage Range | 40-60VDC |
| Protection Features | Overload, Short Circuit, Over Temperature |
Describes installation, operation, troubleshooting, and safety guidelines.
Contains critical safety and operating instructions for user reference.
Overview of the inverter/charger's purpose, capabilities, and key features.
Illustrates a typical system configuration with inputs and outputs.
Details the physical components and connectivity ports of the inverter.
Details electrical parameters when operating in line mode.
Details electrical parameters when operating in inverter mode.
Details charging parameters for utility and solar modes.
Covers general specs, parallel operation, and dry contact functionality.
Instructions for checking package contents and unit condition.
Provides guidelines and clearance requirements for inverter installation.
Details the procedure and safety precautions for connecting batteries.
Explains BMS communication setup and pin assignments.
Details wiring procedures, cable requirements, and safety for AC connections.
Provides guidelines and safety precautions for connecting PV modules.
Shows wiring diagrams for 120V single-phase parallel setup.
Details wiring diagrams for 240V split-phase parallel setup.
Details wiring diagrams for 3-phase parallel setup.
Guides on re-attaching the front cover after wiring.
Details removing and preparing the display for remote mounting.
Instructions on powering the unit, startup, and panel layout.
Explains different information screens, icons, and button functions.
Describes different operational states like Standby, Line, Battery, and Fault modes.
Covers entering settings, output priority, and charging current configuration.
Details AC input range, battery type, frequency, and voltage settings.
Covers charging parameters, protection, and alarm configurations.
Details timer configurations and data logging intervals for system management.
Explains firmware upgrade, data log export, and parameter rewrite via USB.
Details setting daily timers for output source and charger priority.
Commissioning steps for 120V single-phase systems.
Commissioning steps for 240V split-phase systems.
Commissioning steps for 3-phase systems.
Guides for serial and Wi-Fi connections for monitoring and control.
Instructions for cleaning the anti-dust kit and general upkeep.
Lists common problems, causes, and solutions for inverter issues.
Reference guide for inverter fault and warning codes.
Comprehensive guide for remote panel Wi-Fi setup and app usage.
Contains product certifications and detailed rating information.
To Next Page
