EasyManua.ls Logo

EG4 LIFEPOWER4 48V - User Manual

Default Icon
7 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
©2024 EG4 ELECTRONICS, LLC. ALL RIGHTS RESERVED.
VERSION 1.0 | INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE.
LIFEPOWER4 48V
AUTOMATIC UPDATER GUIDE
Utilizing this device allows the end-user to easily perform a one-time firmware update on
their EG4 LifePower4 48V batteries. By following the steps listed below, the end-user will be
able to update the LifePower4 batteries to the latest version #. (V3.37 or V2.19 depending on
hardware version of the battery)
Please read the guide thoroughly before attempting to perform the update and only perform
the update on ONE battery at a time.
Question and Answer IconNeed help?

Do you have a question about the EG4 LIFEPOWER4 48V and is the answer not in the manual?

Summary

Device Overview

Firmware Update Procedure

LED Sequence Overview

Soft-Bricked Battery Recovery

Recovery Steps

Detailed procedure to recover a soft-bricked battery using the updater.

EG4 LIFEPOWER4 48V Specifications

General IconGeneral
Capacity100Ah
ChemistryLiFePO4
Output Voltage48V
Communication InterfaceRS485, CAN
Protection FeaturesHigh temperature, Low temperature
Cycle Life>6000 cycles @ 80% DOD