Need help?Do you have a question about the EG4 EG4-LL-S and is the answer not in the manual?
General| Nominal Voltage | 51.2 V |
|---|---|
| Nominal Capacity | 100 Ah |
| Energy | 5.12 kWh |
| Voltage Range | 44.8 V - 57.6 V |
| Discharge Voltage | 44.8 V |
| Maximum Continuous Charging Current | 50 A |
| Maximum Continuous Discharging Current | 100 A |
| Warranty | 10 years |
| Chemistry | LiFePO4 |
| Weight | 45 kg |
| Communication | CAN, RS485 |
| Scalability | Up to 16 units in parallel |
| Protection | Over Current, Short Circuit, High Temperature, Low Temperature |
| Cycle Life | 6000 cycles @ 80% DoD |
Read all safety instructions before working on or with the battery.
Safety concerns to observe before, during, and after installation and operation.
Crucial safety guidelines including personnel qualifications and electrical work standards.
Overview of EG4® 48V-LL-S rack-mounted lithium batteries and their features.
Diagram showing how the battery connects to a charge controller and inverter.
Details on the battery module's construction and internal parts.
Labeled diagram identifying all external ports and components of the battery.
Explains the optional ESS disconnect and its integration with the communication system.
Details the included items and initial placement considerations for the battery module.
Guidelines for selecting a suitable location and proper storage of the battery.
Important warnings and requirements for safe and correct battery installation.
Covers cable sizing, torque values, recommended distances, and connecting terminals.
Step-by-step guide for installing batteries within an EG4® battery rack system.
Instructions for establishing parallel communication between multiple battery modules.
Details on cable pinouts and DIP switch settings for battery identification.
Information about the built-in HD LCD touch screen and its display capabilities.
Detailed descriptions of the four function buttons on the LCD screen.
Procedure for activating the LCD screen when the battery is powered on.
How to check individual cell voltages using the LCD screen.
How to view PCB and cell temperatures on the LCD screen.
Step-by-step guide to selecting the communication protocol for the inverter.
Instructions for obtaining and installing the PC-based BMS monitoring software.
Steps to connect the battery to a PC and use the BMS Tools software.
Overview of the Battery Management System's purpose and protective functions.
Details on PCB temperature, cell balance, environmental, and voltage protection.
Table defining warning/protect statuses and corresponding actions for troubleshooting.
Lists common faults, their analysis, and recommended actions for resolution.
Comprehensive table of module operating, environmental, and charging/discharging parameters.
Summary of cell balance, accuracy, power consumption, dimensions, weight, and certifications.
To Next Page
