Need help?Do you have a question about the Eggtimer Rocketry Eggtimer Quark and is the answer not in the manual?
General| Altimeter | Yes |
|---|---|
| Gyroscope | No |
| Barometric pressure sensor | Yes |
| Deployment channels | 2 |
| Current Consumption | 15 mA |
| Battery Backup | No |
| Wireless Connectivity | No |
| Accelerometer | Yes |
| Data logging | Yes |
| Apogee Deployment Delay | Adjustable |
| Main Deployment Altitude | Adjustable |
| Compatibility | Eggtimer Telemetry |
Covers product usage, rocketry safety, and warranty terms.
Chemical warnings and necessary safety precautions.
Steps before assembly, including parts check and resource download.
Advice on soldering SMT parts and recommended tools.
List of tools needed for the assembly process.
Lay out and identify all kit components before starting assembly.
Technique for soldering SMT resistors and capacitors to the board.
Guide for soldering SMT chips like the processor and driver chips.
Instructions for mounting voltage regulator, rectifier diode, and buzzer.
Instructions for installing 3-pin headers and the optional 4-pin terminal block.
Connect battery, verify initial beep patterns for basic functionality.
Guide to checking solder joints, polarity, and diagnosing functional problems.
To Next Page