Name: Ego Power+ CS1400
Brand: Ego Power+
Rating: 4 (1 reviews)

Questions and Answers:

K
kkimJul 29, 2025
Why my Ego Power+ Chainsaw motor does not run?
- B
  Brendan ReedJul 30, 2025
  If the Ego Power+ Chainsaw motor isn't running, make sure the battery pack is properly attached. Check and clean the contacts before reinstalling the battery. Ensure the battery is charged. If the battery or chainsaw is too hot, let them cool down. Press and hold the lock-off button before pressing the trigger. Disengage the chain brake by pulling the kickback brake handle back. Also, check if the saw chain is stuck in the wood or if there's debris in the bar groove or side cover; remove any obstructions.
T
toddwatsonAug 4, 2025
What to do if my Ego Power+ CS1400 Chainsaw bar and chain running hot and smoking?
- M
  mariahfarmerAug 4, 2025
  If the bar and chain of your Ego Power+ Chainsaw are running hot and smoking, the chain tension might be too tight, so re-tension the saw chain. Also, the chain oil tank could be empty, so refill it with bar and chain lubricant. Finally, there might be debris in the guide bar groove, so clear it out.
M
Mary EdwardsAug 10, 2025
Why is my Ego Power+ CS1400 Chainsaw not cutting properly?
- K
  Kenneth McguireAug 10, 2025
  If your Ego Power+ Chainsaw isn't cutting properly, the chain tension might be insufficient. Also, the chain could be dull. Another reason might be that the chain is installed backwards or is worn. Check the oil level, refill if necessary, because the chain might be dry or excessively stretched. Finally, the chain might not be in the bar groove.