56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC 25
ADJUSTING THE
CUTTING-HEIGHT (Fig. 12)
WARNING:
Do not at any time
make any adjustment to the lawn mower
without rst stopping the motor, removing
the battery pack and waiting for the blade
to stop rotating.
WARNING:
Keep your feet away
from the deck when adjusting its height.
The mower can be set to 6 cutting heights between 1-3/16'' (30mm) and 4'' (100mm).
Choose the proper cutting height according to the type and condition of the grass.
1. Use one hand to hold the right handle tube for stability, and use the other hand to
move the cutting-height adjustment lever outwards from the slots in the cutting-
height indication plate.
2. Move the cutting-height adjustment lever toward the back of the mower for a
higher cutting height; move it toward the front of the mower for a lower cutting
height.
3. Once arriving at the desired cutting-height position, engage the cutting-height
adjustment lever back into the slot.
TO ATTACH/DETACH THE
BATTERY PACK (Fig. 13)
CHARGE BEFORE FIRST USE.
WARNING:
If any parts are broken
or missing, do not attempt to attach the
battery pack to the mower or operate the
mower until the broken or missing parts
are replaced. Failure to do so could result
in serious injury.
1. The battery cover is hinged. Raise the battery cover by lifting the front of the
cover.
12
Cutting-Height
Adjustment Lever
Cutting-Height
Indication Plate
13
Battery-Release
Button
Battery-Pack Cover
To Next Page
Loading...
