EasyManua.ls Logo

Ego Power+ LT0300 - Operation; Battery Pack Installation and Removal

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56V LITHIUM-ION COMPACT AREA LIGHT — LT0300/LT0300-FC12
OPERATION
WARNING:
Do not use any attachments or accessories not recommended by the
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
Before each use, inspect the entire product for damaged, missing, or loose parts, such
as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced.
APPLICATION
You may use this product for flood lighting and area lighting.
TO INSTALL/REMOVE BATTERY
PACK (Fig. 2)
Fully charge the battery pack
before first use!
To install
Align the ribs of the battery
pack with the mounting slots in
the light’s battery port.
Press the battery pack into the battery port until it snaps into position.
To remove
Press the battery-release button. The battery pack will disengage from the latch
and the ejection mechanism will assist with removal.
Remove the battery pack from the light.
2
Battery Rib
Mounting Slot
Battery-
release
Button

Related product manuals