56-VOLT LITHIUM-ION POLE SAW — PS1000/PS1000-FC 11
INTRODUCTION
Congratulations on your selection of the EGO POLE SAW. It has been designed, engineered
and manufactured to give you the best possible dependability and performance.
Should you experience any problem you cannot easily remedy, please contact EGO
customer service center 1-855-EGO-5656.
This manual contains important information on the safe assembly, operation and
maintenance of your product. Read it carefully before using the product. Keep this
manual handy so you can refer to it at any time.
SERIAL NUMBER _____________________ DATE OF PURCHASE _________________
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP THEM IN A
SAFE PLACE FOR FUTURE REFERENCE
SPECIFICATIONS
Rated Voltage
56 V
Guide Bar Length 10” (250 mm)
Chain Pitch 1/4” (6.4 mm)
Chain Gauge 0.043” (1.1 mm)
Oil Tank Capacity 2.7 oz (80 ml)
Number of Drive Links 56
Machine Length (without extension pole)
Max. 9.58 ft (292 cm)
Min. 7.64 ft (233 cm)
Machine Length (with extension pole)
Max 12.86 ft (392 cm)
Min 10.92 ft (333 cm)
Recommended Operating Temperature 5°F – 104°F (-15°C – 40°C)
Recommended Storage Temperature -4°F – 158°F (-20°C – 70°C)
Weight (without battery pack and chain
sheath)
9.37 lb. (4.25 kg)
To Next Page
Loading...