EasyManua.ls Logo

Ego Power+ PS1000 - Battery and Parts Safety; Battery Pack Integrity and Use; Battery Disposal and Handling

Ego Power+ PS1000
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56-VOLT LITHIUM-ION POLE SAW — PS1000/PS1000-FC 9
Do not use a battery pack or machine that is damaged or modied. Damaged
or modied batteries may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
Use machines only with specically designated battery packs. Use of any
other battery packs may create a risk of injury and re.
Have servicing performed by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the product is maintained.
Use only with the battery packs and chargers listed below:
BATTERY PACK CHARGER
BA1400, BA1400-FC, BA2800, BA2800-FC,
BA4200, BA4200-FC, BA1400T, BA1400T-FC,
BA2240T, BA2240T-FC, BA2242T, BA2242T-FC,
BA2800T, BA2800T-FC, BA3360T, BA3360T-FC,
BA4200T, BA4200T-FC, BA5600T, BA5600T-FC,
BA6720T, BA6720T-FC
CH2100, CH2100-FC,
CH3200, CH3200-FC,
CH5500, CH5500-FC,
CH2800D, CH2800D-FC,
CH7000, CH7000-FC
Do not dispose of the battery in a re. The cells may explode. Check with local
codes for possible special disposal instructions.
Do not open or mutilate the battery. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
CAUTION!
The electrolyte is a dilute sulfuric acid that is harmful to the skin and
eyes. It is electrically conductive and corrosive.
Exercise care in handling batteries in order not to short the battery with
conducting materials such as rings, bracelets, and keys. The battery or
conductor may overheat and cause burns.
Replacement Parts - When servicing, use only identical EGO replacement parts.
Use of any other accessory or attachment may increase the risk of injury.
Battery machines do not have to be plugged into an electrical outlet;
therefore, they are always in operating condition. Be aware of possible
hazards even when the machine is not operating. Take care when performing
maintenance or service.
Remove or disconnect the battery pack before servicing, cleaning or
removing material from the product.