EGO 55 Series User Manual

product operating instruction
E.G.O. Germany (E.G.O. Elektro-Gerätebau GmbH)
document id.: 90.60145.653-001-02-A / state: 230 - released
designation: Thermostats 55.xxxxx.xxx / 56.xxxxx.xxx
page
7
of
19
2 Safety
2.1 Intended use
EGO Thermostats are intended for the following applications, depending on the type (temperature
regulator, thermal cut-out, temperature limiter):
 Temperature regulator: regulates the operating temperature of a medium.
 Temperature limiter: For safety reasons, limits the operating temperature of a medium to an
adjustable maximum temperature.
 Thermal cut-out: For safety reasons, limits the operating temperature of a medium to a fixed
maximum temperature.
Any other use requires the written consent of E.G.O..
EGO Thermostats and Temperature Limiters are not dangerous substances in the sense of the
EC Dangerous Preparations Directive (1999/45/EG) or the German Hazardous Substances
Ordinance (GefStoffV) and thus are not subject to labeling requirements.
Exception: Diastates that are filled with a metal alloy with a low melting point are marked with a
separate warning sign: “Attention. Filler reacts with water. Danger of fire and etching“.
EGO thermostats that are filled with a metal alloy with a low melting point are treated
separately. The working area must be arranged to prevent any contact between the metal
alloy and water, as this leads to a chemical reaction. The thermostats must be protected
against mechanical factors such as shock and impacts.
Proper use also includes the following points:
 Compliance with the permissible operating conditions according to the type drawing.
 Follow these operating instructions.
2.2 Staff qualification
These operating instructions are intended for following staff / staff groups:
Staff Required qualification
Production staff of the
electrical appliance
manufacturer
Has received instruction for the required activity from the electrical
appliance manufacturer.
Qualified electrician
 Knows the relevant standards and regulations for electrical
installation.
 Has experience in using the relevant tools and aids for electrical
installation.
 Has knowledge of electrical appliances.
 Has received training from the electrical appliance manufacturer.
Tab. 3: Staff qualification
document id.: 90.60145.653-001-02-A / state: 230 - released
view date: 2023-05-22 12:49:50 / user: SCHLAGET
item id.: 55.32519.440-00/69A / SAP material state: 1A

EGO 55 Series Specifications

General

Brand	EGO
Model	55 Series
Category	Thermostat
Language	English