56V LITHIUM-ION CORDLESS BLOWER — LB4800E16
ASSEMBLING THE BLOWER TUBE
WARNING:
To prevent
accidental starting that could cause
serious personal injury, always
remove the battery pack from the tool
when assembling parts.
1. Align either of the grooves in
the tube with the knob on the
blower housing. Push the tube
onto the blower housing until
the knob engages the grooves
(Fig. 1&2).
2. Turn the tube in the direction
of the arrow until both of
the knobs slide into the lock
positions (Fig. 2&3).
Tube
Groove
Knob
1
2
3
Lock Position
To Next Page
Loading...
