EGO LB4800E - Page 20

56V LITHIUM-ION CORDLESS BLOWER — LB4800E20
STARTING/STOPPING THE BLOWER (Fig. 6)
 To start the blower, press down on the lock-off lever and hold it, then depress the
trigger. The blower will begin to run.
 To stop the blower, release the trigger.
ADJUSTING THE AIR VELOCITY (Fig. 6)
6
Air Velocity Adjusting Knob
Boost Button
Lock-off Lever
Trigger
The blower is equipped with stepless speed regulation to control air speed.
To increase the air velocity, turn the air velocity adjusting knob clockwise to the “rabbit”
position; To reduce the air velocity, turn the knob counterclockwise to the “tortoise”
position.
To enhance the air velocity, press the boost button to temporarily amplify the air speed
to the maximum.The blower will resume the previous speed when this button is
released.