EGO LB6000 - How to replace the connecting lever; Initial Lever Disassembly

How to replace the connecting lever
45
1. Open the housing set and disconnect connector 2 and connector 3 as shown in the “How
to disassemble the blower” and “how to replace the PCBA” section.
2. Loosen the bolt to separate the support from the connecting lever.
Description Part Number Quantity
Bolt
5640243001
1
Hexagon nut
5630015001
1
Washer
5650419002
1
Bolt
Support
Connecting
lever
Hexagon nut
Washer