EGO LB6000E Repair Guide Line

How to disassemble the blower
12
a) Set the multimeter function to “Resistance measuring” .
b) Pierce one pen pin of the multimeter into the sealing glue and force the pin
contacting onto one end of the fuse, then pierce another pen pin into the
sealing glue and contacting onto the other end of the fuse.
c) If the resistance is below 1 Ω, means a good fuse, go to the next testing step;
otherwise means a broken fuse.
d) If the fuse is broken, follow the procedure “How to replace the PCBA” to fit a
new PCBA.

EGO LB6000E Specifications

General

Type	Backpack blower
Power	- W
Airspeed	232 km/h
Working type	Blowing
Product color	Black, Grey
Battery included	No
Battery voltage	56 V

Weight and Dimensions

Weight	5700 g