EGO LB6000E Repair Guide Line

How to disassemble the blower
13
3) Measure the MOSFET in the PCBA (Step 1)
a) Set the multimeter function to “Diode
measuring” .
b) Push the red pen pin to the negative electric
contact.
c) Contact the black pen pin to the three
connectors separately and measure the voltage.
d) If the LCD displays 0.45~0.55V for each
measurement, go to the next testing step,
otherwise means the PCBA is broken. Follow
the procedure “How to replace the PCBA” to fit
a new PCBA.

EGO LB6000E Specifications

General

Type	Backpack blower
Power	- W
Airspeed	232 km/h
Working type	Blowing
Product color	Black, Grey
Battery included	No
Battery voltage	56 V

Weight and Dimensions

Weight	5700 g