22
4. Test the blower
a) Connect the battery electric contact
of the new PCBA to a fully charged
EGO battery.
b) Press the main switch briefly and
release it.
c) Check the motor(inside the duct set)
working status through the fan
baffle. If the blower fan rotates
counterclockwise, means the
replacement is successful. Otherwise
recheck the connection or replace a
new duct set and test again.
How to Replace the PCBA
Look through the fan baffle
and check the motor rotation
direction
Battery electric contact
EGO Battery
Main Switch
To Next Page
Loading...
