EGO LM2020E-SP - Blade Removal

1. Blade Removal
3
Another Stabilizer
Stabilizer
2
1
Fixing hole
1. Stop the motor and remove the battery pack from the mower.
2. Wear protective gloves, and turn the mower on its side for preparation (Fig. 1).
3. Place a metal rod (e.g., a screwdriver) with diameter less than 8 mm into the fixing hole to act as
a stabilizer and place another metal rod (e.g., a long bit) with diameter less than 6.35 mm into the
holes to act as another stabilizer (Fig. 2).
LM2020E-SP Lawn Mower