10
2. Safety Button Replacement
LM2020E-SP Lawn Mower
2
Bottom Switch Box Cover
1
6. Mount the spring onto the actuator and make sure it is securely located(Fig. 1).
NOTICE: In case that the spring remains located in the bottom switch box cover after opening
the switch box cover(Fig. 2), just take down it first and save it for reassembly.
7. For improved conical spring, step 4 and step 6 will be replaced by tightening the conical spring with
the screw directly after locating the conical spring into its place. See next slide for installation
improvement.
8. Close the switch box cover as indicated in “Closing the Switch Box Cover” part shown.
To Next Page
Loading...
