To Next Page

To Previous Page

56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC24

ATTACHING/REMOVING THE SIDE

DISCHARGE CHUTE

(Fig. 11a & b)

WARNING:

Do not at any time

make any adjustment to the lawn mower

without rst stopping the motor, removing

the battery pack and waiting for the blade

to stop rotating.

1. Remove the battery.

2. Lift the rear-discharge door.

3. Align the lower edge of the

discharge with the groove of the

doorsill and insert it into the slot.

4. Push the top of the discharge and

insert it into the mower. Check to

see that it is securely seated in the

deck.

5. To remove the side discharge chute,

lift the rear-discharge door, grasp the side discharge chute and pull it out.

6. Release the discharge door and make sure that it rests rmly against the

discharge chute.

11a

Groove

11b

Step 1

Step 2

Questions and Answers:

Need help?

Do you have a question about the EGO LM2100SP and is the answer not in the manual?

EGO LM2100SP Specifications

General