56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC 43
Note: When replacing the rear wheel for
the self propelled mower (LM2100SP/
LM2100SP-FC), remove the drive gear
from the worn wheel and assemble to the
new wheel with the 3 screws.
5. Mount the wave washer and the
new wheel on the wheel axle. Note
that the round recess must face
outward.
6. Lock the wheel with the bolt by
tightening the bolt clockwise.
7. Mount the dust cover onto the wheel and press it in place.
33c
Dust Cover
Bolt
Round Recess
facing outside
Front Wheel
Wave Washer
Wheel Axle
Rear wheel for LM2100SP/LM2100SP-FC
To Next Page
Loading...
