EasyManua.ls Logo

EGO ME0801 User Manual

EGO ME0801
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
Español p. 53
Français p. 26
OPERATOR'S MANUAL
EDGER
ATTACHMENT
MODEL NUMBER EA0800
EXCLUSIVELY FOR USE WITH
EGO POWER+ POWER HEAD PH1400
16-1107_EGO_EA0800_Edger Attachment_manual_NA_V1
Question and Answer IconNeed help?

Do you have a question about the EGO ME0801 and is the answer not in the manual?

EGO ME0801 Specifications

General IconGeneral
Power SourceBattery
Battery Voltage56V
Cutting Width8 inches
Adjustable HandleYes
Motor TypeBrushless
Blade Length8 inches
Blade MaterialSteel

Summary

Safety Symbols

Safety Instructions

Important Safety Instructions

Read All Instructions

Emphasizes the necessity of reading and understanding all safety instructions before use.

Introduction

Specifications

Packing List

Lists all included parts and quantities for the edger attachment.

Recommended Blade

Details the specific blade recommended for the edger attachment.

Description

Know Your Edger Attachment

Introduces components and features of the edger attachment via illustration.

Assembly

Unpacking

Instructions for inspecting the product and its accessories after removal from the box.

Connecting the Edger Attachment to the Power Head

Step-by-step guide for securely attaching the edger to the power head.

Removing the Attachment from the Power Head

Procedures for safely detaching the edger attachment from the power head.

Operation

Applications

Outlines the intended uses and purposes of the edger attachment.

Using the Edger Attachment with Power Head

Guidance on how to properly operate the edger attachment with the power head.

Adjusting Depth of Cut

Explains how to adjust the cutting depth using the guide wheel and knob.

To Start/Stop the Tool

Directs users to the power head manual for starting and stopping procedures.

Operating Tips

Provides advice for safe and effective operation, including grip and pace.

Maintenance

General Maintenance

General guidelines for cleaning and caring for the edger attachment's plastic parts.

Clean the Unit

Steps for cleaning the blade, guard, and air vents after each use.

Replacing the Blade

Detailed instructions and warnings for safely removing and replacing the edger blade.

Installing the Blade

Step-by-step guide for correctly installing a new edger blade.

Replacing the Guide Wheel

Instructions on how to replace the guide wheel assembly.

Replacing the Debris Flap

Procedures for replacing the debris flap on the edger attachment.

Checking and Replacing the Anti-Wear Protective Guard/Guide Plate

Guidance on inspecting and replacing the protective guard and guide plate.

Removing the Guide Plate

Instructions on how to remove the guide plate if it hinders operation.

Transmission Gears Lubrication

Instructions for lubricating the transmission gears in the gear case.

Storing the Unit

Guidelines for properly storing the edger attachment when not in use.

Troubleshooting

Warranty

EGO Warranty Policy

Outlines general warranty periods for EGO equipment and accessories.

Limited Service Warranty

Details specific terms and conditions of the limited service warranty.

How to Obtain Service

Instructions on contacting EGO for warranty service and required information.

Additional Limitations

Lists limitations and disclaimers related to implied warranties and consequential damages.

Related product manuals