RT0063
Page 1 of 33
ISSUE 4: 26/04/23
Installation time: 180 minutes (without tubliner)
INSTALLATION INSTRUCTIONS
ELECTRIC
• Check that all work practices comply with safety standards.
• Please wear appropriate clothing and use safety equipment.
Caution
Safety Notes
• Do not attach EGR RollTrac in a location or by a method not specified.
• Do not use this product for any vehicle make or model, other than those specified in this document.
• Do not remove the plaque or label from this product.
• Do not modify the structure of the EGR RollTrac in any way.
• Read through the fitting instructions before installation of EGR RollTrac.
• Always install the accessory following the fitting instructions. Failure to do so may cause damage to the vehicle or the accessory.
• Ensure all recyclable discarded vehicle accessory components and packaging are recycled following local recycling regulations.
• It is always recommended that this accessory is fitted by a qualified Technician.
• Safely store and protect any removed vehicle components.
• Ensure all bare metal surfaces are protected using Automotive Bare Metal Primer and touch-up paint.
• Remove all metal swarf and dust from all vehicle surfaces if surface is used for accessory installation.
General Notes
Vehicle Model: FORD RANGER
Year of manufacture: MY22 onwards
*RT0063*
IMPORTANT:
IF THE EGR ROLLTRAC IS FITTED TO THE VEHICLE WITH ANY ACCESSORY
LOADED WITH MORE THAN 45KG, A TUB REINFORCEMENT KIT MUST BE
FITTED. THE TUB REINFORCEMENT KIT CAN BE PURCHASED FROM YOUR
LOCAL FORD DEALER OR DIRECTLY FROM EGR (PART No. KIT040256).
-- EGR Document ID#121541 v5 2023-05-09 23:59:32 awilmott --
To Next Page
