EHEIM streamON+ 6500 - Flow Rate Control; Product Maintenance; Pump Cleaning Procedure

English
27
Controlling the 󰄉ow rate
streamON+ 3500 (⌦D)
1. Move the power controller
f forwards or backwards in order to adjust
the water 󰘱ow rate.
streamON+ 6500 / 9500 (⌦E)
1. Turn the power controller
g left or right in order to adjust the water
󰘱ow rate.
6. Maintenance
Attention! Electrocution!
▶ Before maintenance work, remove the mains plug of the pump.
Caution! Material damage.
▶ Do not use hard objects or cleaning agents for cleaning.
▶ The pump parts are not dishwasher-proof. Do not clean the pump parts
in the dishwasher.
The following sections describe maintenance work necessary for optimum
and fault-free operation. Regular maintenance prolongs the service life and
secures functionality of the pump over a long period.
Depending on the degree of contamination, we recommend that you completely disas-
semble and clean the appliance. To do so, proceed as follows:
Cleaning the pump
1. Before maintenance work, remove the mains plug of the pump.
2. Hold the pump with one hand.
3. With the other hand, move the magnet half with logo on the glass panel
away from the pump.
4. Remove the pump.
streamON+ 3500 (⌦F)
1. Press both latches simultaneously and remove the pump basket
h
from the motor housing.