Ei Electronics EIB650i Series User Manual

Install all the other Smoke Alarms similarly.
Tamperproofing the Smoke Alarms
The Alarm can be made tamperproof to prevent unauthorised
removal.
Break off the small pillar on the base as shown in figure 8a.
To remove the Alarm from the ceiling it is now necessary to
use a small screwdriver. To release the Alarm, push the catch
towards the ceiling and then twist off (see figure 8b).
14
Figure 7
BREAK OFF
SMALL PILLAR
Figure 8a
How to Tamperproof
PUSH UP CATCH & TWIST
ALARM ANTI-CLOCKWISE TO REMOVE
Figure 8b
How to Remove

Ei Electronics EIB650i Series Specifications

General

Brand	Ei Electronics
Model	EIB650i Series
Category	Smoke Alarm
Language	English