1
IMPORTANT SAFEGUARDS
WHEN USING THIS EQUIPMENT, BASIC
SAFETY
PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED, INCLUDING THE FOLLOWING:
1.
READ
AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING EQUIPMENT.
2.
DO
NOT
OPERATE EQUIPMENT WITH A DAMAGED CORD OR, IF THE
EQUIPMENT HAS BEEN DROPPED
OR
DAMAGED-UNTIL
IT
HAS BEEN
EXAMINED BY A QUALIFIED SERVICEMAN.
3.
IF AN EXTENSION CORD IS NECESSARY CARE SHOULD BE TAKEN TO
ARRANGE THE CORD
SO
THAT IT WILL NOT BE TRIPPED OVER
OR
PULLED.
4.
ALWAYS UNPLUG EQUIPMENT
FROM
ELECTRICAL OUTLET WHEN NOT IN
USE.
NEVER YANK CORD TO PULL PLUG FROM OUTLET. GRASP PLUG AND
PULL TO DISCONNECT.
5.
TO PROTECT AGAINST ELECTRICAL SHOCK HAZARDS, DO
NOT
EXPOSE
THIS EQUIPMENT TO RAIN, MOISTURE,
OR
OTHER LIQUIDS.
6.
TO
AVOID ELECTRIC SHOCK HAZARD, DO NOT DISASSEMBLE THIS EQUIP-
MENT, BUT TAKE IT TO A QUALIFIED SERVICEMAN WHEN SOME SERVICE
OR
REPAIR WORK IS REQUIRED. INCORRECT REASSEMBLY CAN CAUSE ELEC-
TRIC SHOCK HAZARD WHEN THE EQUIPMENT IS USED SUBSEQUENTLY.
SAVE THESE INSTRUCTIONS
CAUTION:
TO
REDUCE
THE
RISK OF ELECTRIC
SHOCK. DO
NOT
REMOVE COVER (OR BACK).
NO
USER-SERVICEABLE PARTS INSIDE.
REFER
SERVICING
TO
QUALIFIED SERVICE PERSON-
NEL.
The lightning flash
with
arrowhead symbol,
within
an
equilateral triangle, is intended to alert
the user to the presence
of
uninsulated "danger-
ous voltage" within the product's enclosure that
may
be
of
sufficient magnitude to constitute a
risk of
electric shocl{to persons.
The
exclamation point within an equilateral tri-
angle
is
intended
to
alert the user to the presence
of important operating and maintenance (servic-
ing) instructions in the
literature accompanying
the
appliance.
To Next Page
Loading...