Cassette tape
player I recorder
2
The
controls and
their functions
1.
Listening center
Four 1/4" jacks for group listening of
tape
playing.
2. Auxiliary input jack (AUX IN)
With accessory connecting cord, this
jack
a
llo
ws recording directly from a
radio, phonograph, tape
player, or other
source.
3. Microphone/Remote jacks
(MIC
REMOTE)
Provide connection for dual-plug micro-
phon
e,
with remote start-stop switch
on microphone.
4. Record level (3279 only)
Single lighted diode shows right level
of recording. When light
is
not on
during recording,
volume is too l
ow
. If
light
.
is
on continually, volume is too
high. A
flickering light indicates volume
is adjusted to the right range.
5. Tape counter and reset button
(3279
only)
Provides method for indexing tape
se
lections and locating parts
of
tape
when desired. Button r
ese
ts counter to
"0
00". Conforms to
2X
ANSI standards.
To Next Page
Loading...