To Next Page
J
jenniferandersonAug 9, 2025
What to do if Einhell Royal RLH 2540 FB is not drawing in material?
- DDanielle LarsonAug 9, 2025
If your Einhell Royal Paper Shredder isn't drawing in material, there could be a few reasons. First, the shredding blade might be running in reverse, so try changing the direction of rotation. Alternatively, there might be a material blockage in the filling funnel; in this case, change the direction of rotation and pull the material out. Finally, the shredding blade could be jammed. To resolve this, feed in thick branches again and change the direction of rotation to release the jammed material.
General