To Next PageTo Next PageWhat to do if my EINHELL BG-PB 33 Blower does not start?
If your EINHELL Blower isn't starting, make sure you're following the correct starting procedure. A sooted or damp spark plug can also prevent starting; try cleaning or replacing it. If these steps don't work, the carburetor setting may be incorrect.
Why does my EINHELL Blower smoke so much?
If your EINHELL Blower engine smokes excessively, the fuel mix may be incorrect. Ensure you are using the correct fuel mix as indicated in the fuel mixing table. If the issue persists, the carburetor setting might be incorrect.
Why EINHELL BG-PB 33 starts but does not develop its full output?
If your EINHELL Blower starts but doesn't reach its full output, check the choke lever setting and ensure it is set to the correct position. Also, a soiled air filter can restrict performance; clean it to resolve this. If the problem continues, the carburetor setting may be incorrect.
How to fix EINHELL Blower engine that does not run smoothly?
If the EINHELL Blower engine isn't running smoothly, the spark plug's electrode gap might be incorrect. Try cleaning the spark plug and adjusting the electrode gap, or replace it with a new one. If that doesn't solve the issue, the carburetor setting may be incorrect.
General| Power | 0.7 kW |
|---|---|
| Air Speed | 210 km/h |
| Weight | 4.5 kg |
| Engine displacement | 33 cc |
| Air volume | 720 m³/h |
Detailed specifications including engine type, power, displacement, speed, and noise levels.
Essential safety rules, personal protective equipment, and prohibited actions for safe operation.
Guidance on recommended fuels, oil mixture ratios, and storage of fuel.
Procedure for starting a cold engine, including choke and fuel pump usage.
Instructions for starting an engine that has recently been running.
Common faults, their possible causes, and recommended troubleshooting steps.
