To Next PageTo Next PageWhat to do if the EINHELL BG-SA 1231 motor does not start?
If the EINHELL Tiller motor doesn't start, here are a few things to check: * **No electricity:** Verify the line and fuse are working correctly. * **Defective cable:** Inspect the cable for any damage. * **Clogged housing:** Adjust the working depth if necessary and clean the housing so the roller can run freely.
Why does the engine performance of my EINHELL Tiller drop?
Several factors can cause the engine performance of your EINHELL Tiller to drop: 1. **Soil too firm:** Try changing the working depth. 2. **Clogged housing:** Clean the housing. 3. **Worn roller:** Replace the roller.
How to correct an imprecise scarifying result with my EINHELL BG-SA 1231?
If you're getting an imprecise scarifying result with your EINHELL Tiller, check these: * **Worn roller:** Replace the roller. * **Wrong working depth:** Correct the working depth.
What to do if my EINHELL Lawn and Garden Equipment motor does not start?
If the EINHELL Lawn and Garden Equipment motor doesn't start, there are several potential causes. First, check the line and fuse to ensure there is electricity in the plug. If the cable is defective, it should be checked. If the switch or switch/plug block is defective, or if the connections to the motor or capacitor are disconnected, have the machine checked by a customer service center. Lastly, if the housing is clogged, adjust the working depth if necessary and clean the housing so that the roller can run freely.
Why does my EINHELL Lawn and Garden Equipment engine performance drop?
If the engine performance of your EINHELL Lawn and Garden Equipment drops, it could be due to several reasons. The soil might be too firm, in which case you should change the working depth. Another cause could be a clogged housing, so make sure to clean it. Finally, if the roller is badly worn, consider replacing it.
How to fix an imprecise scarifying result with EINHELL Lawn and Garden Equipment?
If you are getting an imprecise scarifying result with your EINHELL Lawn and Garden Equipment, it could be due to a worn roller, which would need to be replaced. Alternatively, the working depth might be incorrect, so try correcting it.
General| Power | 1200 W |
|---|---|
| Working Width | 31 cm |
| Working Depth | 20 cm |
| Number of Tines/Blades | 4 |
| Mains supply | 230 V |
| Engine type | Electric |
