Important:
Depending on the material, deeper cuts should
be performed in several passes.
Hold the router with both hands on all cutting
jobs.
7. Maintenance
Keep the ventilation slits in the motor housing
clean and clear at all times. Use compressed air to
remove any deposits from the slits.
8. Ordering replacement parts
Please quote the following data when ordering repla-
cement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
GB
9
To Next Page
Loading...
