What to do if my EINHELL Trimmer equipment does not start?
If your EINHELL Trimmer does not start, it could be due to several reasons. First, make sure you are following the correct starting procedure as outlined in the instructions. Also, the spark plug might be sooted or damp; try cleaning it or replacing it with a new one. Another possible cause is an incorrect carburetor setting.
Why does my EINHELL Trimmer engine smoke excessively?
If your EINHELL Trimmer engine smokes excessively, it could be due to an incorrect fuel mix. Ensure you are using the correct fuel mix as specified in the fuel mixing table. Also, it could be due to an incorrect carburetor setting.
Why EINHELL Trimmer equipment starts but does not develop its full power?
If your EINHELL Trimmer starts but doesn't develop its full power, check the choke lever setting and ensure it is set to the correct position „ “. Another possible cause is a soiled air filter; try cleaning it. Also, it could be due to an incorrect carburetor setting.
How to fix EINHELL Trimmer engine that does not run smoothly?
If the EINHELL Trimmer engine does not run smoothly, it might be due to an incorrect electrode gap on the spark plug. Try cleaning the spark plug and adjusting the electrode gap, or fitting a new spark plug. Another possible cause is an incorrect carburetor setting.
General| Power source | Gasoline |
|---|---|
| Cutting width | 420 mm |
| Line diameter | 2.4 mm |
| Product color | Multicolor |
| Rotational speed | 7200 RPM |
| Secondary handle | Yes |
| Fuel tank capacity | 0.9 L |
| Engine displacement | 51.7 cm³ |
| Line length supplied | 4 m |
| Cutting diameter (max) | - mm |
Weight and Dimensions| Weight | 8000 g |
|---|---|
| Package depth | 975 mm |
| Package width | 310 mm |
| Package weight | 10600 g |
General safety rules beyond basic personal protective equipment (PPE) requirements.
Pre-operation checks and safety setup procedures to ensure safe use.
Safe usage, storage, and monitoring procedures for the equipment.
Further advice and precautions for safe operation of the equipment.
Specific safety measures and warnings when working with the cutting blade.
List of all components included in the delivery package for verification.
Attaching the main operating handle assembly for comfortable use.
Connecting the main shaft sections securely for proper assembly.
Installing protective covers for cutting attachments to prevent injury.
Procedure for installing or changing the cutting blade.
Procedure for installing or changing the cutting line spool.
Adjusting the working height of the cutting tool for different tasks.
Specifications for fuel mixture and oil for optimal engine performance.
Detailed guide on mixing petrol and oil ratios for the engine.
Step-by-step procedures for starting the engine under different conditions.
Methods for safely stopping the engine during use or for storage.
General advice for efficient and safe operation of the equipment.
Method to advance the trimmer line automatically during operation.
Techniques for various cutting tasks and environments with the scythe.
How to effectively trim and mow different areas for an even cut.
Specific technique for trimming close to the ground effectively.
Method for trimming near solid structures without damage.
Technique for clearing vegetation near tree trunks safely.
How to effectively mow vegetation down to the ground.
Operational limitations and safety measures against kickback and jamming.
Procedure for refilling or replacing the trimmer line spool.
Sharpening the integrated blade on the guard for optimal cutting.
Cleaning or replacing the air filter for optimal engine performance.
Cleaning, checking, or replacing the spark plug for reliable starting.
Adjustments to the carburetor for proper engine performance.
Fine-tuning engine speed controls for optimal operation.
Applying grease to the gear unit at specified intervals.
Instructions for maintaining the cleanliness of the tool.
Guidelines for storing the equipment safely and correctly.
Recommended methods for moving the equipment safely.
Information required when ordering replacement parts for the equipment.
To Next Page