To Next PageTo Next Page
Need help?Do you have a question about the EINHELL GC-CS 85 and is the answer not in the manual?
General| Bore size | 23 mm |
|---|---|
| Idle speed | 5500 RPM |
| Maximum power | 85 W |
| Grinding wheel diameter | 108 mm |
| Grinding wheel thickness | 3.2 mm |
| Continuous operating time @ maximum power | 20 min |
| Power source | AC |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Weight | 1900 g |
|---|---|
| Package depth | 210 mm |
| Package width | 260 mm |
| Package weight | 2600 g |
Read instructions, wear ear protection, breathing mask, and safety goggles.
Details safety rules and crucial precautions for using the equipment.
Identifies all parts of the chain sharpener and lists supplied accessories.
Explains the intended purpose of the chain sharpener and its limitations.
Provides detailed technical specifications of the chain sharpener.
Instructions for initial checks and assembly before operating the device.
Detailed steps for operating the chain sharpener to sharpen saw chains.
Safety guidelines for replacing a damaged power cable on the equipment.
Procedures for cleaning the chain sharpener to ensure proper functioning.
Instructions for changing the grinding wheel and ordering spare parts.
Guidelines for environmentally friendly disposal of the equipment.
Recommendations for storing the chain sharpener when not in use.
Information on service partners, wear parts, consumables, and missing parts.
Instructions on how to report equipment defects or malfunctions online.
Detailed explanation of the warranty coverage, exclusions, and claim procedures.
Official declaration that the product complies with relevant EU directives and standards.
